Product Specifications - Interlogix ES2402-24P-2C User Manual

1.5 Product Specifications

Product
Hardware Specifications
10/100Mbps Copper Ports
Gigabit Copper Ports
SFP/mini-GBIC Slots
Switch Architecture
Switch Fabric
Throughput
Address Table
Share Data Buffer
Flow Control
Maximum Transmit Unit
Reset Button
Dimensions (W x D x H)
Weight
LED
Twisted-Pair
Cable
Fiber-Optic
Cable
Power Requirements
Power Consumption
ES2402-24P-2C
24 10/100BASE-TX RJ45 Auto-MDI/MDI-X ports
2 10/100/1000BASE-T RJ45 Auto-MDI/MDI-X ports
2 1000BASE-X SFP interfaces, shared with Port-25 to Port-26
Store-and-Forward
8.8Gbps / non-blocking
6.54Mpps@64Bytes
4K entries, automatic source address learning and ageing
2.75Mb embedded memory for packet buffers
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
1536 Bytes
< 5 sec: System reboot
> 5 sec: Factory Default
440 x 300 x 44.5 mm, 1U height
TBD kg
System:
Power (Green)
10/100BASE-TX RJ45 Interfaces (Port1 to Port24):
10/100Mbps LNK/ACT (Green)
PoE In-Use (Orange)
10/100/1000BASE-T RJ45 / SFP Interfaces (Port25 to Port26):
LNK/ACT (Green)
100/1000 (Green)
PoE Usage LED Indicators
90W, 180W, 270W, 360W (Orange)
10BASE-T: 2-Pair UTP CAT. 3, 4, 5, up to 100 meters
100BASE-TX: 2-Pair UTP CAT. 5, 5e up to 100 meters
1000BASE-T: 4-Pair UTP CAT. 5e, 6 up to 100 meters
1000BASE-SX :
50/125μm or 62.5/125μm multi-mode fiber optic cable, up to 550m (varying on
SFP module)
1000BASE-LX :
9/125μm single-mode fiber optic cable, up to 10/20/30/40/50/70/120 kilometers
(varying on SFP module)
100~240V AC, 50/60Hz, 4A
Max.440 watts / 1502.68 BTU
12