Led Indicators; Rear Panel; Hardware Installation; Before Start Up - Interlogix IFS ES2001-4P-4T User Manual

Table of Contents

2.2.1 LED indicators

 System

LED

Color

PWR

Green

 Per 10/100Mbps port

LED

Color

PoE In-use

Green

LNK/ACT

Green

The rear panel of the ES2001-4P-4T has an AC inlet power socket, which accepts input power from 100 to 240VAC,

50-60Hz.

Power Notice:

The device is a power-required device, it means, it will not work till it is powered. If your network is system critical, please

consider using UPS (Uninterrupted Power Supply) for your device to help prevent data loss or network downtime.

In some areas, installing a surge suppression device may also help to protect your ES2001-4P-4T from being damaged by

unregulated surge or current to the ES2001-4P-4T or the power adapter.

Before your installation, please refer to the following for your cabling:

100Base-TX

All 100Base-TX ports come with Auto-Negotiation capability. They automatically support 100Base-TX and

10Base-T networks. Users only need to plug a working network device into one of the 100Base-TX ports, and then

turn on the ES2001-4P-4T. The port will automatically detect the appropriate speed (10Mbps, 20Mbps, 100Mbps or

200Mbps) after the negotiation with the connected device.

Lights to indicate that the Switch has power.

Lights to indicate the port is providing 48VDC in-line power. (1-4 ports)

Lit: Indicates the link through that port is successfully established.

Blinks to indicate that the Switch is actively sending or receiving data over that port.

Figure 2-2 ES2001-4P-4T Switch rear panel

IFS ES2001-4P-4T User Manual

Function

Table of Contents