Reboot - Interlogix ES2402-24P-2C User Manual

When firmware upgrade process is completed then the following screen appears, please press the "continue" button and
wait for system reboot. After device reboot then can use the latest firmware of the PoE Web Smart Ethernet Switch.
1. Recommend using IE 8.0 web browser for firmware upgrade process.
2. Firmware upgrade needs several minutes. Please wait a while, and don't power off
the PoE Web Smart Ethernet Switch until the update progress is complete.

4.2.6 Reboot

The Reboot page enables the device to be rebooted from a remote location. Once the Confirm button is pressed, user has to
re-login the Web interface about 60 seconds later. The Reboot Switch screen appears
system.
Press "Confirm" button to reboot the PoE Web Smart Ethernet Switch. After device reboot completed, the Web login screen
appears and login for further management.
Figure 4-2-9 Firmware Update Web Page Screen
Figure 4-2-10 Firmware Update Web Page Screen
Figure 4-2-11 Reboot Switch Page Screenshot
40
Figure 4-2-11 and click to reboot the