Gas Booster Mounting - Rinnai Prestige Operation & Installation Manual

GAS BOOSTER MOUNTING

Step 1. Mount upper mounting bracket using
template provided.
(SG175, ESG175, SG215 & ESG215 are
factory mounted).
Step 3. Hang booster on bracket and secure with
screws provided.
If the gas booster is not mounted on the storage cylinder, ensure that the wall or structure on which it is to be
mounted is capable of supporting the weight of the appliance and associated pipe work. Refer to the table on page
19 for individual gas booster weights. For gas boosters installed on elevated structures or under floors specific
requirements apply, refer to AS/NZS 5601 for details. Location of gas booster flue terminal must be in accordance
with AS/NZS 5601. Refer page 36.
Rinnai
INSTALLATION - GAS BOOSTED SYSTEMS
Step 2. Fix lower mounting bracket to Booster
using screws provided.
Step 4. Secure lower mounting bracket to cylinder
using screws provided.
37 Split Solar OIM