Engine Air Filter - Land Pride Accu-Z Razor ZSR54 Service Manual

Hide thumbs Also See for Accu-Z Razor ZSR54:
Table of Contents

Advertisement

Section 8: Maintenance & Lubrication

Engine Air Filter

A specially designed dry filter is standard equipment and
supplies clean combustion air to the engine.
NOTE: Do not operate engine with a damaged air filter
or without air filter elements. Dirt will enter engine
causing dust induced engine damage.
IMPORTANT: Do not block air intake such as setting
an object in front of the air intake opening.
Type Air Filters
Internal
Refer to Figure 5-23:
18.5 HP and 23 HP Kawasaki engines and 22 HP and 26
HP Briggs & Stratton engines are supplied with internal
air filters. Perform engine air filter maintenance per the
Engine Operator's Manual and "Maintenance
Schedule" on page 55.
Canister Type Air Filters
Refer to Figure 5-24 & Figure 5-25:
The 23.5 HP Kawasaki engine is equipped with a
canister air filter mounted above the engine. Perform
engine air filter maintenance per the Engine Operator's
Manual and "Maintenance Schedule" on page 55.
1. Replace filter element every 200 hours or every year,
(whichever comes first). Service more frequently
when used in dusty conditions.
2. Release retaining clips and remove filter element.
Clean canister with a damp cloth.
3. Before installing a new filter element, inspect it by
placing a bright light inside and rotate the element
slowly, looking for any holes or tears in the paper.
Also check gaskets for cuts or tears. Do not attempt
to use a damaged element which will allow abrasive
particles to enter the engine.
4. Inspect burp valve. Replace burp valve if it is
cracked, torn, stays open, or is missing. See also
"Burp Valve Information" on page 70.
5. Install new inner element into the new outer element
as shown in Figure 5-25.
6. Install new outer filter element by inserting the open
end in the canister first.
IMPORTANT: Burp valve must be positioned below
the canister to make certain it drains water away
from the filter elements properly.
7. Reinstall canister cap with burp valve positioned
below the canister. Make sure it seals all around the
canister before latching retaining clips.
8. Check all fittings and clamps periodically for
tightness. Inspect hoses for holes or cracks.
9. Periodically check engine intake hose for signs of
ingested dust. Repair source of ingested dirt.
10. Never operate a machine without an air filter
installed.
7/30/12
Table of Contents
Canister Type
Air Filter
Hose Clamps
27835
26 HP Kawasaki Engine With Canister Type Air filter
Canister
Open Ends of Filter
Elements Face Canister
Burp Valve - Position Below Air Filter Canister
Canister Air Filter For 26Hp Kawasaki Engine
ZSR54 & ZSR60 Accu-Z Razor
Briggs & Stratton Internal Air Filter Shown
Figure 5-23
Air Intake Hose
Positioned Below Canister
Figure 5-24
Rain Cap - Positioned Vertically
on Top of Air Filter Canister.
Air Filter Inner Element
Figure 5-25
®
Zero Turn Mowers 357-388SM
Removed Cover
25947
Retaining Clips
Burp Valve
Air Filter Outer Element
Canister Cap
27851
69

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Accu-z razor zsr60

Table of Contents