Page 1
Table of Contents Zero Turn Mowers ® ZT60i & ZT72i (S/N 748110+) Accu-Z 33758 357-552M Operator’s Manual Read the Operator’s Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Cover photo may show optional equipment not supplied with standard unit.
Page 2
Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
Refer to Parts Manual smart phone, open the App, point your QR Locator on this page for phone on the QR code, and take a picture. detailed instructions. ® 2/06/14 ZT60i & ZT72i (S/N 748110+) Accu-Z Zero Turn Mowers 357-552M...
Page 4
Any fluid injected into the skin or eyes must be treated within a few hours or gangrene may result. ® ZT60i & ZT72i (S/N 748110+) Accu-Z Zero Turn Mowers 357-552M 2/06/14...
Page 5
When removing and installing Operating equipment safely wheels, use wheel handling requires the full attention of the equipment adequate for the operator. Avoid wearing radio weight involved. headphones while operating machinery. ® 2/06/14 ZT60i & ZT72i (S/N 748110+) Accu-Z Zero Turn Mowers 357-552M...
Spray soapy water on the surface where the label is to all damaged or missing labels. Order new labels from your be placed. nearest Land Pride dealer. To find your nearest dealer, Peel backing from label. Press firmly onto the surface. visit our dealer locator at www.landpride.com.
Page 7
Table of Contents Important Safety Information 838-307C 33761 Warning: Moving Parts 33761 838-310C Warning: General 838-815C Warning: Rollover Hazard 33764 ® 2/06/14 ZT60i & ZT72i (S/N 748110+) Accu-Z Zero Turn Mowers 357-552M...
Page 8
Table of Contents Important Safety Information 838-308C 33764 Warning: Rotating Blade Hazard 838-306C Warning: Do not operator without deflector 33764 838-833C Warning: Fuel (Imbedded in Fuel Tank) 33763 ® ZT60i & ZT72i (S/N 748110+) Accu-Z Zero Turn Mowers 357-552M 2/06/14...
Table of Contents Introduction Introduction Land Pride welcomes you to the growing family of new Terminology product owners. “Right” or “Left” as used in this manual is determined by facing forward while sitting in the operator seat unless This Zero Turn Mower has been designed with care and built by skilled workers using quality materials.
3. For further assistance write to: Land Pride Service Department 1525 East North Street P.O. Box 5060 Salina, Ks. 67402-5060 E-mail address lpservicedept@landpride.com 33761 Serial Number Plate Location Figure 1 ® 2/06/14 ZT60i & ZT72i (S/N 748110+) Accu-Z Zero Turn Mowers 357-552M...
8. See “Seat Reach Adjustment” on page 25 for positioning the seat forward and rearward. 33766 Control Lever & Seat Assembly (Standard Seat Shown) Figure 1-1 ® ZT60i & ZT72i (S/N 748110+) Accu-Z Zero Turn Mowers 357-552M 2/06/14...
2. First read instructions under “Fuel System” on page 41 and then add a small amount of gasoline with fuel stabilizer to the fuel tank. ® 2/06/14 ZT60i & ZT72i (S/N 748110+) Accu-Z Zero Turn Mowers 357-552M...
Always travel and cut grass with throttle if light comes on during normal operation and investigate set at full engine rpm speed. Decrease travel speed by cause before putting mower back into service. ® 2/06/14 ZT60i & ZT72i (S/N 748110+) Accu-Z Zero Turn Mowers 357-552M...
3. Close seat platform by lowering platform down until latch arm catches on the seat platform. See “Seat 33770 Reach Adjustment” on page 25 for positioning seat Seat Release Latch forward and rearward. Figure 2-5 ® ZT60i & ZT72i (S/N 748110+) Accu-Z Zero Turn Mowers 357-552M 2/06/14...
IMPORTANT: Following repairs, always make certain both bypass valves are rotated horizontal Bypass Valve (run position) before operating mower. 33771 Bypass Valve (Operating or Run Position Shown) Figure 2-7 ® 2/06/14 ZT60i & ZT72i (S/N 748110+) Accu-Z Zero Turn Mowers 357-552M...
Refer to “Troubleshooting” on page 56. 6. Allow engine to idle a few minutes to warm up before operating the mower. ® ZT60i & ZT72i (S/N 748110+) Accu-Z Zero Turn Mowers 357-552M 2/06/14...
1. With engine running and operator sitting on the seat, on a stopped wheel can damage the turf. move park brake to (OFF), pull both control levers (IN), and then turn blade engagement switch (ON). ® 2/06/14 ZT60i & ZT72i (S/N 748110+) Accu-Z Zero Turn Mowers 357-552M...
Move control levers to neutral to stop. (Ref. Frame #2) • Spread both control levers fully apart and engage park brake when stopped for awhile. (Ref. Frame #1) ® ZT60i & ZT72i (S/N 748110+) Accu-Z Zero Turn Mowers 357-552M 2/06/14...
Page 23
Do not make sudden uncontrolled changes with control levers. Change speed and direction with steady controlled movements of the control levers. Never drive recklessly. ® 2/06/14 ZT60i & ZT72i (S/N 748110+) Accu-Z Zero Turn Mowers 357-552M...
This gives maximum power to the drive wheels and muffler while they are hot. cutting blades when needed. Use control levers to control ground speed rather than engine rpm. ® ZT60i & ZT72i (S/N 748110+) Accu-Z Zero Turn Mowers 357-552M 2/06/14...
Position the throttle The Land Pride Zero Turn Mowers are designed to control at half throttle and pull the choke to the “up/on” deliver professional cutting quality, while delivering high position.
Tighten nut (#3) one-half turn at a time until personnel. Consult your Land Pride service center when applied pressure at break lever (#1) is assistance is needed.
The pump linkage rods (#1) are properly adjusted if the lower control levers (#2) are aligned with neutral parking slots in the mower housing when released. ® ZT60i & ZT72i (S/N 748110+) Accu-Z Zero Turn Mowers 357-552M 2/06/14...
Page 29
2. Stop mower on a level surface, place control levers in neutral, set park brake (ON), shut power off and remove switch key. ® 2/06/14 ZT60i & ZT72i (S/N 748110+) Accu-Z Zero Turn Mowers 357-552M...
7" as shown in Figure 3-8. 33778 c. When adjustment is complete, hold hex whiz Deck Drive Belt Adjustment nut (#3B) still while tightening hex whiz nut (#3A). Figure 3-9 ® ZT60i & ZT72i (S/N 748110+) Accu-Z Zero Turn Mowers 357-552M 2/06/14...
5. Place two 3" high blocks (#8) under the deck’s back edge in-line with the left and right blade spindles. 3" 33779 Deck Cutting Height & Leveling (48" Deck Shown) Figure 3-10 ® 2/06/14 ZT60i & ZT72i (S/N 748110+) Accu-Z Zero Turn Mowers 357-552M...
WARNING mechanic and should not be attempted by unskilled When possible, clean under the deck using a stick or similar personnel. Consult your Land Pride dealer when instrument making sure that no part of the body, especially assistance is needed.
Otherwise, replace every 200 hours or 2 years whichever comes first. 5. Inspect transaxles for oil leaks. Have your nearest Land Pride Service center make repairs as needed. 6. Replace air cleaner filter element if damaged, every 200 hours or every season (whichever comes first). Replace more frequently when used in dusty conditions.
Flush area with clean water and call a physician immediately. Acid will also damage clothing. ® 2/06/14 ZT60i & ZT72i (S/N 748110+) Accu-Z Zero Turn Mowers 357-552M...
Page 38
1 thru 4 above have been completed, then 33904 unplug the relay switch and replace it with a new Relay Switch Shown Unplugged relay switch. Figure 5-5 ® ZT60i & ZT72i (S/N 748110+) Accu-Z Zero Turn Mowers 357-552M 2/06/14...
NOTE: The transaxle units are equipped with bypass valves. For more information refer to “Moving Mower with Stalled Engine” on page 17. The ZT60i & ZT72i mower are equipped with two independent Hydro-Gear ZT5400 Integrated Zero- Turn transaxle units. The units are located beneath the seat and require oil and filter changes on a regular basis.
(#4). See filters are required with each oil change. They may be “Hydrostatic Transaxle Specifications & purchased from your nearest Land Pride dealer. See Capacities” on page 51 for oil type and quantity. page 51 for filter part numbers.
10% ethanol. Do not mix oil with gasoline. 3. Close both bypass valves by rotating them clockwise to “RUN”. Land Pride recommends adding correct amounts of gas 4. With engine running and control levers in neutral, stabilizer/conditioner in the fuel. For best results, follow slowly move levers forward and reverse 5 to 6 times.
1. Park unit on a flat surface. Make sure blade engagement switch is (OFF), both control levers are All Land Pride Zero Turn Mowers are EPA compliant as of (OUT) and park brake is (ON). Stop engine and January 1, 2012 production date and include a decal remove ignition key.
Replace the burp valve if it is open, cracked, torn, or missing. 27786 Normal Open Cracked Torn Missing Figure 5-14 ® ZT60i & ZT72i (S/N 748110+) Accu-Z Zero Turn Mowers 357-552M 2/06/14...
The air filter warranty expires upon cleaning the event of a dust induced engine damage. See or servicing a used filter in any manner. Land Pride “Engine Specifications & Capacities” on page 51 for does not warranty a dust induced engine damage if a Land Pride air filter replacement numbers.
(#3) and blade bolt (#2). Be careful not to cross thread blade bolt while installing it. 2. Tighten blade bolt to the correct torque. See “Additional Torque Values” on page 58 for correct torque values. ® 2/06/14 ZT60i & ZT72i (S/N 748110+) Accu-Z Zero Turn Mowers 357-552M...
A coating of oil may also be mower after storing it for a season: applied to the deck underside to minimize oxidation. 3. Clean and touch up all scrapes with Land Pride spray IMPORTANT: Do not use a high pressure washer on paint.
Quantity = As required 33761 33818 Hours Center Blade Spindle Lower Deck fully down to access under floor platform 1 - Zerk Type of Lubrication: Multi-purpose Grease Quantity = As required ® 2/06/14 ZT60i & ZT72i (S/N 748110+) Accu-Z Zero Turn Mowers 357-552M...
Page 52
Hours Caster Wheel Bearing Located on hub of caster wheels 2 - Zerks (One on each caster wheel) Type of Lubrication: Multi-purpose Grease Quantity = As required 33820 ® ZT60i & ZT72i (S/N 748110+) Accu-Z Zero Turn Mowers 357-552M 2/06/14...
1170 lbs. w/deluxe seat Width of Cut 60" 72" Cutting Height 1" to 5" in 1/4" increments Trim Capacity (left side) 8 1/4" 13 1/2" Specifications to continue on next page. ® 2/06/14 ZT60i & ZT72i (S/N 748110+) Accu-Z Zero Turn Mowers 357-552M...
Page 54
.25 x 2 1/2” x 25” Blade Tip Speed 18,350 FPM 18,800 FPM Blade Drive Electric clutch drive with single V-belt to three spindles and spring tension idler pulley ® ZT60i & ZT72i (S/N 748110+) Accu-Z Zero Turn Mowers 357-552M 2/06/14...
Table of Contents Section 7: Features & Benefits Section 7: Features & Benefits ZT60i & ZT72i Models (S/N 748110+) Features Benefits 60" or 72" cutting width Sized right and priced right for ranch, estate owners, and commercial operators. 1" to 5" Cutting height Provides a good range of cutting heights in 1/4’...
Page 57
Table of Contents Section 7: Features & Benefits ZT60i & ZT72i Models (S/N 748110+) Features Benefits Sleek styling EPA approved twin 12 Gallon fuel capacity for plenty of operating range and decreased downtime. six gallon fuel tanks with sight Extra large fuel openings for easy fueling. Fuel caps are EPA approved, non vented, placed...
Clean underside of deck. Cutting Blades are not operating at full Increase engine rpms to full speed (3600 rpm) engine speed. Check engine speed with Land Pride Inductive Tachometer, Part No. 890-909C. Belt over center take-up is loose. Tension over center take-up.
Page 59
Purge transaxle of air or see your dealer. Transaxles operates hot. Hydro-drive faulty. See your dealer. Not operating engine at rated speed. Increase engine speed to 3600 rpm. ® 2/06/14 ZT60i & ZT72i (S/N 748110+) Accu-Z Zero Turn Mowers 357-552M...
Filters and Plugs are considered maintenance items. This Warranty is limited to the repair or replacement of any defective part by Land Pride and the installation by the dealer of any such replacement part, and does not cover common wear items such as blades, belts, tines, etc.
Page 63
15. HOSE RUBBER.25ID/.5 OD SAE30R7 16. HOSE RUBBER.25ID/.5 OD SAE30R7 17. GROMMET, FUEL TANK FITTING 18. ROV ASY 19. SV KIT, EPA VALVE & GROMMET 33823 Evaporative Emission Control Components Figure 10-1 ® 2/06/14 ZT60i & ZT72i (S/N 748110+) Accu-Z Zero Turn Mowers 357-552M...