Table of Contents
Advertisement
Obtaining the IP address for the Web interface access
To access the Web interface and use the remote presence feature, you need the IP
address for the IMM. You can obtain the IMM IP address through the Setup utility.
To locate the IP address, complete the following steps:
1. Turn on the server.
2. When the prompt <F1> Setup is displayed, press F1. (This prompt is displayed
3. From the Setup utility main menu, select System Settings.
4. On the next screen, select Integrated Management Module.
5. On the next screen, select Network Configuration.
6. Find the IP address and write it down.
7. Exit from the Setup utility.
Logging on to the Web interface
To log on to the Web interface to use the remote presence functions, complete the
following steps:
1. Open a Web browser on a computer that connects to the server and in the
2. Type the user name and password. If you are using the IMM for the first time,
3. On the Welcome page, type a timeout value (in minutes) in the field that is
4. Click Continue to start the session. The browser opens the System Status
62
System x iDataPlex dx360 M3: User's Guide
Note: Approximately 1 to 2 minutes after the server is connected to ac power,
the power-control button becomes active.
Note: Approximately 1 to 2 minutes after the server is connected to ac power,
the power-control button becomes active.
on the screen for only a few seconds. You must press F1 quickly.) If you have
set both a power-on password and an administrator password, you must type
the administrator password to access the full Setup utility menu.
address or URL field, type the IP address or host name of the IMM to which
you want to connect.
Notes:
a. If you are logging in to the IMM for the first time after installation, the IMM
defaults to DHCP. If a DHCP host is not available, the IMM uses the default
static IP address 192.168.70.125.
b. You can obtain the DHCP-assigned IP address or the static IP address from
the server UEFI or from your network administrator.
The Login page is displayed.
you can obtain the user name and password from your system administrator. All
login attempts are documented in the event log. A welcome page opens in your
browser.
Note: The IMM is set initially with a user name of USERID and password of
PASSW0RD (passw0rd with a zero, not a the letter O). You have read/write
access. For enhanced security, change this default password during your initial
configuration.
provided. The IMM will log you off of the Web interface if your browser is
inactive for the number of minutes that you entered for the timeout value.
page, which gives you a quick view of the server status and the server health
summary.
Advertisement
Table of Contents
