Obtaining The Ip Address For The Web Interface Access; Logging On To The Web Interface - IBM x3850 X5 7145 Installation And User Manual

When one of the two microprocessors reports an internal error, the IMM disables
the defective microprocessor and restarts the server with the one good
microprocessor.
The IMM also provides the following remote server management capabilities
through the OSA SMBridge management utility program:
v Command-line interface (IPMI Shell)
v Serial over LAN

Obtaining the IP address for the Web interface access

To access the Web interface, you need the IP address of the IMM which you can
obtain through the Setup utility. To obtain the IP address, complete the following
steps:
1. Turn on the server.
2. When the prompt <F1> Setup is displayed, press F1. If you have set both a
3. Select System Settings → Integrated Management Module → Network
4. Locate the IP address.
5. Exit from the Setup utility.

Logging on to the Web interface

To log on to the IMM Web interface, complete the following steps:
1. Open a Web browser and in the Address or URL field, type the IP address or
2. On the Login page, type the user name and password. If you are using the IMM
3. On the Welcome page, type a timeout value (in minutes) in the field that is
The command-line interface provides direct access to server management
functions through the IPMI 2.0 protocol. Use the command-line interface to issue
commands to control the server power, view system information, and identify the
server. You can also save one or more commands as a text file and run the file
as a script.
Establish a Serial over LAN (SOL) connection to manage servers from a remote
location. You can remotely view and change the UEFI settings, restart the server,
identify the server, and perform other management functions. Any standard Telnet
client application can access the SOL connection.
power-on password and an administrator password, you must type the
administrator password to access the full Setup utility menu.
Configuration.
host name of the IMM to which you want to connect.
Note: If you are logging on to the IMM for the first time after installation, the
IMM defaults to DHCP. If a DHCP host is not available, the IMM assigns a static
IP address of 192.168.70.125. The MAC address tag provides the default
hostname of the IMM and does not require you to start the server.
for the first time, you can obtain the user name and password from your system
administrator. All login attempts are documented in the event log.
Note: The IMM is set initially with a user name of USERID and password of
PASSW0RD (with a zero, not the letter O). You have read/write access. You
must change this default password the first time you log on.
provided. The IMM will log you off the Web interface if your browser is inactive
for the number of minutes that you entered for the timeout value.
Chapter 3. Configuring the server
71