Table of Contents
Advertisement
• TCP Port Number
• Inactive Timeout
Example:
Use Microsoft Windows Hyper Terminal, TCP/IP Winsock mode
H
yperTerminal is a program that you can use to connect to other computers, Telnet sites, online services, and host
computers, using either your modem, a null modem cable, a Console cable or Ethernet connection.
The users want to use the TCP Server mode to connect to a Ethernet Switch via Hyper Terminal, Winsock mode
1.
Setup Operation Mode and Serial Port of ICS-10x
2.
Hyper Terminal set up a new connection with the T
Setup Operation Mode and Serial Port of ICS-10x
1.
From the WEB interface, set the Serial operation mode of ICS-10x to "TCP Server" and set the TCP Port Number to
"23".
2
.
Set the Serial Port Configuration of ICS-10x as below:
Pair Connection - Remote(Slave)
The default mode is "Disable".
The TCP port that ICS-10x uses to listen to connections and that other device
must use to contact ICS-10x. To avoid conflicts with well known TCP ports, the
default is set to "1024".
Use the parameter to set an inactive timeout. The unit drops the connection if
there is no activity on the serial line before the set time expires. To disable the
inactive timeout enter "0".
Figure 4-14 Example: TCP Server Configuration screen
-26-
CP/IP Winsock
User's Manual of ICS-10x
Hide quick links:
Advertisement
Table of Contents
