Genie GTH-6622 Operator's Handbook Manual page 95

NO BOOM LOWERING AND
EXTENSION, NO HOLDING FRAME
TILTING
THE HYDRAULIC OIL
THERMOMETER DOES NOT WORK
THE PARKING BRAKE LIGHT
DOES NOT LIGHT UP
BOOM DOES NOT MOVE
ATTENTION
In case of faults not listed in this chapter, address to the GENIE Technical Assistance, your nearest
authorised workshop or dealer.
Handler with telescopic boom GTH-6622
FAULTS AND TROUBLESHOOTING
• Fuse blown
• Emergency button ON
• This is normal, when the outside tem-
perature is low and/or the machine is
used for short periods, since the
hydraulic oil cannot warm up over
40÷50°C
• Fuse blown
• Fuse blown
• "ROAD/JOBSITE" switch set to
"ROAD"
• Emergency button ON
E-3
Page
Document 57.0005.8200 - 12/2005
• Replace fuses F2 and/or F24
• Reset the button
• Check and replace fuse F2, if
necessary
• Check and replace fuse F22, if
necessary
• Set to "CAB"
• Reset the button