C-5.1 Using The Load Charts - Genie GTH-6622 Operator's Handbook Manual

■ C-5.1 USING THE LOAD CHARTS

The charts indicating the maximum permissible load in
relation to the boom extension and the lifting height of
the same load are installed on the cab windscreen and/
or illustrated in the quick guide.
The load chart indicates the payload limits of the
machine under safe conditions.
To operate under safe conditions, always refer to these
charts.
CAUTION
The load charts illustrated in this manual are given only
as a mere example. To define the payload limits, refer
to the load charts applied in the cab of your machine.
25
20
40 deg
15
30 deg
10
20 deg
5
10 deg
0 deg
0
E
-3 deg
3
15
Handler with telescopic boom GTH-6622
OPERATING INSTRUCTIONS
60 deg
50 deg
A
B
C
D
10 5
Document 57.0005.8200 - 12/2005
The load charts applied on the cab windscreen refer
to a stationary machine standing on a solid and
level ground.
Raise the load some centimetres and check its
stability before raising it completely.
GTH-6622 CAPACITY CHART
67 deg
E
D
C
B
A
Forward reach, ft
0
C-24
Page
CAUTION