Genie GTH-6622 Operator's Handbook Manual page 89

■
Fuse box relays
Ref. Circuit
K01 Starting enabling command
K02 Forward speed enabling command
K03 Inhibition with brake pedal stepped down
K04 Overload warning system control unit enabling command
K05 Reverse speed enabling command
K06 Overload warning system solenoid valve enabling
command
st nd
K07 1 and 2 speed control relay
K08 Shaft stop control unit
K09 K08 power relay
■
Engine compartment fuses and relays
Ref. Circuit
F30 Preheating control unit maxifuse
F31 System protection fuse
A02 Preheating control unit
K11 Start relay
ATTENTION
• Do not use fuses having a higher amperage
than that recommended, since they can
damage the electric system seriously.
• If the fuse blows after a short time, look for the
fault source by checking the electric system.
• Always keep some spare fuses for an
emergency.
• Never try to repair or short blown fuses.
• Make sure the contacts of fuses and fuse-
sockets ensure a good electric connection and
are not oxidised.
Handler with telescopic boom GTH-6622
MAINTENANCE
Amp
70
50
D-23
Page
Document 57.0005.8200 - 12/2005
F14 F28 F29
F29
F13 F27
F29
F29
F12 F26
F11 F25
F10 F24
F9 F23
F8 F22
F7 F21
F6 F20
F5 F19
F4 F18
F3 F17
F2 F16
F1 F15
A02 F30
INT
K5 K10
K4 K9
K3 K8
K2 K7
K1 K6
F31 K11