Setting Up; Installation Mode - Panasonic PT-RZ12K Operating Instructions Manual

Setting up

Installation mode

The installation modes of the projector are as follows. Set the [PROJECTOR SETUP] menu → [PROJECTION
METHOD] (x page 125) depending on the installation mode.
Mounting on the ceiling and projecting forward
Menu item
[PROJECTION METHOD]
Mounting on the ceiling and projecting from rear
(Using the translucent screen)
Menu item
[PROJECTION METHOD]
Portrait setting and projecting from the rear
(Using the translucent screen)
Menu item
[PROJECTION METHOD]
Note
f In the portrait setting, the on-screen menu is displayed sideways.
To display the on-screen menu in portrait, go to the [DISPLAY OPTION] menu → [ON-SCREEN DISPLAY] (x page 118) and change the
[OSD ROTATION] setting.
34 - ENGLISH
Chapter 2 Getting Started — Setting up
Setting on a desk/floor and projecting from rear
(Using the translucent screen)
Setting value
[FRONT/CEILING]
Setting on a desk/floor and projecting forward
Setting value
[REAR/CEILING]
Portrait setting and projecting forward
Setting value
[REAR/FLOOR]
Menu item
[PROJECTION METHOD]
Menu item
[PROJECTION METHOD]
Menu item
[PROJECTION METHOD]
Setting value
[REAR/FLOOR]
Setting value
[FRONT/FLOOR]
Setting value
[FRONT/FLOOR]