Table of Contents
Advertisement
Seat fore and aft adjustment
Press the switch forward or backward
in direction of arrow 1.
i
Depending on the set height of the head re-
straint, the seat fore and aft position is automat-
ically pre-set.
Backrest tilt
Press the switch forward or backward
in direction of arrow 2.
Head restraint height
Press the switch up or down in
direction of arrow 3.
Warning!
For your protection, drive only with properly
positioned head restraints.
Adjust the head restraint so that it is as
close to the head as possible and the center
of the head restraint supports the back of
the head at eye level. This will reduce the po-
tential for injury to the head and neck in the
event of an accident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are
intended to help reduce injuries during an
accident.
Seat height
Press the switch up or down in
direction of arrow 4.
Seat cushion tilt
Press the switch up or down in
direction of arrow 5 until your upper
legs are lightly supported.
Head restraint adjusting
G
Manually adjust the head restraint.
Push or pull on the upper edge of the
head restraint cushion.
i
Adjust the head restraint in such a way that
it is as close to the head as possible.
Getting started
Adjusting
43
Advertisement
Table of Contents
