Table of Contents
Advertisement
Practical hints
Replacing bulbs
Low beam bulb (halogen headlamps
only)
Turn housing cover 1 counterclock-
wise and remove it.
Turn bulb holder 6 with the bulb coun-
terclockwise and remove it.
Pull the bulb at its socket out of bulb
holder 6.
Insert the new bulb so that its socket
locates in the recess of bulb holder 6
and is level to it.
Reinsert bulb holder 6 with the bulb in
the lamp and turn clockwise.
Align housing cover 1 and turn it
clockwise.
408
High beam bulb/high beam flasher
bulb (halogen headlamps)/high beam
flasher bulb (Bi-Xenon* headlamps)
Turn housing cover 2 counterclock-
wise and remove it.
Turn bulb holder 4 with the bulb coun-
terclockwise and remove it.
Pull the bulb at its socket out of bulb
holder 4.
Insert the new bulb so that its socket
locates in the recess of bulb holder 4
and is level to it.
Reinsert bulb holder 4 with the bulb in
the lamp and turn clockwise.
Align housing cover 2 and turn it
clockwise.
Front turn signal lamp bulb
Turn bulb socket 3 with the bulb
counterclockwise and remove it.
Press gently onto the bulb and turn
counterclockwise out of bulb
socket 3.
Press the new bulb gently into bulb
socket 3 and turn clockwise until it
engages.
Place bulb socket 3 back into the
lamp and turn it clockwise.
Advertisement
Table of Contents
