Mercedes-Benz 2008 CLS 550 Operator's Manual page 328

2008 cls-class
Table of Contents

Advertisement

If applicable to your vehicle's tire configu-
ration, tires can be rotated according to
the tire manufacturer's recommended in-
tervals in the tire manufacturer's warranty
pamphlet located in your vehicle literature
portfolio. If none is available, tires should
be rotated every 3000 to 6000 miles
(5000 to 10000 km), or sooner if neces-
sary, according to the degree of tire wear.
The same rotation (spinning) direction
must be maintained ( page 295).
Rotate tires before the characteristic tire
wear pattern becomes visible (shoulder
wear on front tires and tread center wear
on rear tires).
Thoroughly clean the mounting face of
wheels and brake disks, i.e. the inner side
of the wheels/tires, during each rotation.
Check for and ensure proper tire inflation
pressure.
Warning!
Have the tightening torque checked after
changing a wheel. Wheels could become
loose if not tightened with a torque of
96 lb-ft (130 Nm).
Only use Genuine Mercedes-Benz wheel
bolts specified for your vehicle's rims.
For information on wheel change, see the
"Practical hints" section ( page 393) and
( page 412).
G
Operation
Tires and wheels
327

Advertisement

Table of Contents
loading

This manual is also suitable for:

2008 cls-class2008 cls 63 amgCls-class 2008Cls 63 amg 2008Cls 550 2008

Table of Contents