Display symbol Display message
D
Coolant
Stop Vehicle,
turn engine off.
Possible cause/consequence Possible solution
The poly-V-belt could be broken.
Stop the vehicle in a safe location and immediately
turn off the engine.
Check the poly-V-belt.
If it is broken:
Do not continue to drive. Otherwise the engine will
overheat due to an inoperative water pump which
may result in damage to the engine. Notify an au-
thorized Mercedes-Benz Center.
If it is intact:
Do not continue to drive the vehicle with this mes-
sage displayed. Doing so could result in serious en-
gine damage that is not covered by the
Mercedes-Benz Limited Warranty.
Observe the coolant temperature indicator in the
instrument cluster ( page 26).
Drive immediately to the nearest authorized
Mercedes-Benz Center.
Practical hints
What to do if ...
377