Pioneer VSX-924-S Operating Instructions Manual page 31

03
MULTI-ZONE setup using HDMI terminal (HDZONE)
Important
! The settings must be changed at ZONE Setup in order to use the HDZONE function
! To use the HDZONE functions, set Control or Control Mode in HDMI Setup to OFF. For details, see
Setup on page 63 .
%
Connect a separate receiver to the HDMI OUT 2 (HDZONE) terminal on this receiver.
Connect speakers and a TV to the HDZONE receiver as shown on the illustration below.
Sub zone (HDZONE)
HDMI IN
(page 94 ).
HDMI
Main zone
OUT 2 OUT 1
(HDZONE) (CONTROL)
SELECTABLE
OUT 2 OUT 1
(HDZONE) (CONTROL)
SELECTABLE
Multi-zone connection using the HDMI terminal and speaker terminals (HDZONE)
Important
! The settings must be changed at ZONE Setup in order to use the HDZONE function
! To use the HDZONE functions, set Control or Control Mode in HDMI Setup to OFF. For details, see
Setup on page 63 .
! You must select HDZONE in Speaker system setting (page 89
1 Connect a pair of speakers to the surround back speaker terminals.
You should have a pair of speakers attached to the surround back speaker terminals as shown below.
2 Connect a TV monitor to the HDMI OUT 2 (HDZONE) terminal on this receiver.
Sub zone (HDZONE)
2
HDMI IN
L R
1
31
Connecting your equipment
(page 94 ).
) to use this setup.
Main zone
OUT 2 OUT 1
(HDZONE) (CONTROL)
SELECTABLE
OUT 2 OUT 1
(HDZONE) (CONTROL)
SURROUND BACK / HDZONE
R L (Single)
SELECTABLE
SURROUND BACK / HDZONE
R
HDMI
L (Single)