Connecting Your Tv And Playback Components - Pioneer VSX-924-S Operating Instructions Manual

03

Connecting your TV and playback components

Connecting using HDMI
If you have an HDMI or DVI (with HDCP) equipped component (Blu-ray Disc player (BD), etc.), you can connect it
to this receiver using a commercially available HDMI cable.
If the TV and playback components support the Control with HDMI feature, the convenient Control with HDMI
functions can be used (see Control with HDMI function
HDMI/DVI-compatible
Other HDMI/DVI-
Blu-ray Disc player
equipped component
HDMI OUT HDMI OUT
HDMI OUT 2 OUT 1
IN BD IN IN IN
1 2 3
(HDZONE) (CONTROL)
ASSIGNABLE
1 6 -
( DVD ) ( SAT/CBL )
SELECTABLE
HDMI OUT 2 OUT 1 IN 1 BD IN
(HDZONE) (CONTROL)
ASSIGNABLE
-
1 6
(DVD)
SELECTABLE
ANALOG
IN 1
(CD)
ASSIGNABLE
AUDIO
! When connecting to an HDMI/DVI-compatible monitor using the HDMI OUT 2 terminal, switch the HDMI
output setting to OUT 2 or OUT 1+2. See Switching the HDMI output
Also, MAIN/HDZONE must be set to MAIN beforehand
! For input components, connections other than HDMI connections are also possible (see
player with no HDMI output on page 25 ).
! If you want to listen to the sound of the TV over the receiver, connect the receiver and TV with audio cables.
on page 62 ).
HDMI/DVI-compatible monitor
This connection is required in
order to listen to the sound of
the TV over the receiver.
Select one
AUDIO OUT DIGITAL OUT
R ANALOG L COAXIAL OPTICAL
LAN
(10/100)
IN IN /MHL
4 6
DC OUTPUT
for WIRELESS LAN
( OUTPUT 5 V ( OUTPUT 5 V
0.9 A MAX ) 0.6 A MAX )
IN
IN 2 IN 3 IN 4 IN /MHL 6 LAN (10/100)
IN
DC OUTPUT
for WIRELESS LAN
( OUTPUT 5 V ( OUTPUT 5 V
(SAT/CBL) 0.9 A MAX 0.6 A MAX
) ) OPTICAL
IN 1 (TV)
ASSIGNABLE
COAXIAL
IN 1 (DVD)
ASSIGNABLE
ANALOG
IN 1
(CD)
ASSIGNABLE
AUDIO
on page 71 .
(page 94 ).
Connecting your DVD
— When the TV and receiver are connected by HDMI connections, if the TV supports the HDMI ARC (Audio
Return Channel) function, the sound of the TV can be input to the receiver via the HDMI OUT terminal, so
there is no need to connect an audio cable. In this case, set ARC at HDMI Setup to ON (see
page 63 ).
After setting the ARC, some time may be required for the connected device to be recognized and the sound to
be produced.
— If you use a coaxial digital audio cable or RCA (analog) audio cable, you'll need to tell the receiver which digi-
tal or analog audio input you connected the TV to (see
— Please refer to the TV's operation manual for directions on connections and setup for the TV.
HDMI IN
OPTICAL
1 ( TV )
ASSIGNABLE
COAXIAL
( DVD )
1
ASSIGNABLE
24
Connecting your equipment
HDMI Setup
The Input Setup menu on page 39 ).
on