Panorama Roof With Power Tilt/Sliding Panel - Mercedes-Benz B-Class Operator's Manual

opened and closed when the panorama roof
with power tilt/sliding panel is closed.
Roller sunblind reversing feature
The roller sunblind is equipped with an auto-
matic reversing feature. If a solid object blocks
or restricts the roller sunblind during the closing
process, the roller sunblind opens again auto-
matically. The automatic reversing feature is
only an aid and is not a substitute for your atten-
tiveness when closing the roller sunblind.
G
WARNING
The reversing feature does not react:
to soft, light and thin objects, e.g. small fin-
R
gers
when closing the roller sunblind again man-
R
ually immediately after automatic reversal
This means that the reversing feature cannot
prevent someone being trapped in these sit-
uations. There is a risk of injury.
When closing the roller sunblind, make sure
that no body parts are in the sweep area.
If somebody becomes trapped:
release the switch immediately, or
R
press the switch in any direction during the
R
automatic closing process
The closing process is stopped.
Opening and closing
: Opens
Opens
;
Closes
=

Panorama roof with power tilt/sliding panel

Turn the SmartKey to position 1 or 2 in the
X
ignition lock (
Press or pull the 3 switch in the corre-
X
sponding direction.
If you press/pull the 3 switch beyond the
point of resistance, automatic operation is star-
ted in the corresponding direction. You can stop
automatic operation by pressing/pulling the
switch again.
After opening the panorama roof with power
tilt/sliding panel, the roller sunblind automati-
cally closes slightly. This reduces drafts in the
vehicle interior.
Resetting the panorama roof with
power tilt/sliding panel or the roller
sunblind
Reset the panorama roof with power tilt/sliding
panel or the roller sunblind if the panorama roof
with power tilt/sliding panel or the roller sun-
blind does not move smoothly.
Turn the SmartKey to position 1 or 2 in the
X
ignition lock (
Pull the 3 switch repeatedly to the point of
X
resistance in the direction of arrow : until
the panorama roof with power tilt/sliding
panel is fully closed.
Keep the 3 switch pulled for an additional
X
second.
Pull the 3 switch repeatedly to the point of
X
resistance in the direction of arrow : until
the roller sunblind is fully closed.
Keep the 3 switch pulled for an additional
X
second.
Make sure that the panorama roof with power
X
tilt/sliding panel and the roller sunblind can
be fully opened and closed again.
If this is not the case, repeat the steps above.
X
page 114).
Y
page 114).
Y
81
Z