Table of Contents
Advertisement
Getting started
Parking and locking
Turning off engine
Shift the automatic transmission to
position P ( page 178).
Apply the parking brake ( page 59).
i
Always set the parking brake in addi-
tion to shifting to position P
( page 178).
On slopes, turn the front wheels to-
wards the road curb.
Turning off with the SmartKey
Turn the SmartKey in the starter switch
( page 36) to position 0.
Remove the SmartKey from the starter
switch.
The immobilizer is activated.
60
Turning off with KEYLESS-GO*
Press the KEYLESS-GO start/stop
button ( page 37) to turn off the en-
gine.
With the driver's door closed, the start-
er switch is now in position 1. With the
driver's door opened, the starter switch
is set to position 0, same as SmartKey
removed from starter switch
( page 36).
Releasing seat belts
Press the seat belt release button
( page 47).
Allow the retractor to completely
rewind the seat belt by guiding the
latch plate.
!
Make sure the seat belt retracts fully so
that the seat belt and/or latch plate
cannot get caught or pinched in the
door or in the seat mechanism. This
can damage the seat belt and impair
the effectiveness of the seat belt,
and/or cause damage to the door
and/or door trim panel. Such damage
is not covered by the Mercedes-Benz
Limited Warranty.
Damaged seat belts must be replaced.
Contact an authorized Mercedes-Benz
Center.
Advertisement
Table of Contents
