Setting Locator Lighting - Mercedes-Benz 2006 CLS 500 Operator's Manual

Press button æ or ç to select
manual operation ( manual
running lamp mode ( constant
With daytime running lamp mode activated
and the exterior lamp switch at
position M or U, the low beam
headlamps are switched on when the
engine is running.
In low ambient light conditions the follow-
ing lamps will switch on additionally:
Parking lamps
Tail lamps
License plate lamps
Side marker lamps
For more information on the daytime
running lamp mode, see "Lighting"
( page 134).
i
) or daytime
For safety reasons, resetting the
).
Lighting
while driving ( page 157) will not
deactivate the daytime running lamp
mode.
The following message appears in the
multifunction display:
pletely reset to factory settings
while driving.
submenu to factory settings
Cannot be com-
Controls in detail
Control system

Setting locator lighting

With the locator lighting feature activated
and the exterior lamp switch in
position U, the following lamps will
switch on during darkness when the vehi-
cle is unlocked with the SmartKey or
KEYLESS-GO*:
Parking lamps
Tail lamps
License plate lamps
Side marker lamps
Front fog lamps
The locator lighting switches off when the
driver's door is opened.
If you do not open a door after unlocking
the vehicle with the SmartKey, the lamps
will switch off automatically after approxi-
mately 40 seconds.
Move the selection marker with
button æ or ç to the
submenu.
Lighting
165