Vehicle Tool Kit - Mercedes-Benz 2006 CLS 500 Operator's Manual

Cls-class
Table of Contents

Advertisement

Removing the spare wheel
Turn luggage bowl counterclockwise.
Remove spare wheel 2.
Storing the spare wheel
Place spare wheel 2 in wheel well.
Turn luggage bowl clockwise to its stop
to secure the spare wheel.
!
Always lower trunk floor before closing
the trunk.
i
Vehicles with collapsible tire:
The electrical air pump is located under
the luggage bowl 3.

Vehicle tool kit

The vehicle tool kit is stored in the com-
partment underneath the trunk floor
( page 398).
The vehicle tool kit includes:
One pair of universal pliers
One towing eye bolt
One wheel wrench
One alignment bolt
One fuse extractor
One collapsible wheel chock
Spare fuses
Practical hints
Where will I find ...?
Vehicle jack
Warning!
The jack is designed exclusively for jacking
up the vehicle at the jack take-up brackets
built into both sides of the vehicle. To help
avoid personal injury, use the jack only to lift
the vehicle during a wheel change. Never
get beneath the vehicle while it is supported
by the jack. Keep hands and feet away from
the area under the lifted vehicle. Always
firmly set parking brake and block wheels
before raising vehicle with jack.
Do not disengage parking brake while the
vehicle is raised. Be certain that the jack is
always vertical (plumb line) when in use, es-
pecially on hills. Always try to use the jack
on a level surface. Make sure the jack arm is
fully seated in the jack take-up bracket.
Always lower the vehicle onto sufficient
capacity jackstands before working under
the vehicle.
G
399

Advertisement

Table of Contents
loading

Table of Contents