Table of Contents
Advertisement
Insert the mechanical key 1 in direc-
tion of arrow in side opening.
Using mechanical key 1 push gray
slide 2 to unlatch battery
compartment 3.
Pull the battery compartment 3 out of
the housing in direction of arrow.
4 Battery
5 Contact spring
Remove the batteries 4 in direction of
arrow.
Using a lint-free cloth, insert new
batteries 4 under the contact
spring 5 with the plus (+) side facing
up.
Return battery compartment 3 into
housing until it locks into place.
Slide mechanical key 1 back into the
SmartKey.
Check the operation of the SmartKey.
Practical hints
Replacing SmartKey batteries
SmartKey with KEYLESS-GO*
Replacement batteries: Lithium, type
CR 2025 or equivalent.
Remove mechanical key ( page 402).
Insert the mechanical key 3 in side
opening and push grey slide
( page 408).
Battery compartment is unlatched.
Pull battery compartment out of the
housing in direction of arrow
( page 408).
409
Advertisement
Table of Contents
