Storing Positions Into Memory; Recalling Positions From Memory - Mercedes-Benz 2003 E 320 Operator's Manual

Controls in detail
Memory function
The memory button is located on the door.
M Memory button
1,2,3 Stored positions
Be sure that the ignition is switched on
or the relevant door is open and the
SmartKey is inserted in the starter
switch.
110

Storing positions into memory

Adjust the seats, steering wheel and
rear view mirrors to the desired posi-
tion ( page 34).
Press memory button M.
Release memory button and press
stored position button 1, 2 or 3 within
three seconds.
All the settings are stored at the select-
ed position.

Recalling positions from memory

On memory button, press and hold
stored position button 1, 2 or 3 until
the seat, steering wheel and rear view
mirrors have fully moved to the stored
positions.
i
Releasing the button immediately
stops movement to the stored posi-
tions.
Warning!
Do not operate the power seats using the
memory button if the backrest is in an ex-
cessively reclined position. Doing so could
cause damage to front or rear seats.
First move backrest to an upright position.
G