Mercedes-Benz 2003 E 320 Operator's Manual page 297

Display
ABS
Braking system
not working!
BAS defective!
Visit workshop!
BAS Display malfunction
Visit workshop!
Possible cause
The charging voltage has fallen below
10 volts and the ABS has switched off.
The brake system is still functioning nor-
mally but without the ABS available.
The BAS has detected a malfunction and
switched off. The SBC brake system is still
functioning normally but without the BAS
available.
The BAS or the BAS display is malfunction-
ing.
Practical hints
What to do if ...
Suggested solution
When the voltage is above this value
again, the ABS is operational again.
Continue driving with added caution.
Wheels will lock during hard braking,
reducing steering capability.
Have the system checked at an au-
thorized Mercedes-Benz Center as
soon as possible.
Failure to follow these instructions in-
creases the risk of accident.
Continue driving with added caution.
Visit an authorized Mercedes-Benz
Center as soon as possible.
Failure to follow these instructions in-
creases the risk of accident.
Continue driving with added caution.
Visit an authorized Mercedes-Benz
Center as soon as possible.
Failure to follow these instructions in-
creases the risk of accident.
297