The Sbc Brake System - Mercedes-Benz 2003 E 320 Operator's Manual

E-class
Table of Contents

Advertisement

The switch is located on the center con-
sole.
1 ESP off/on
Press button 1.
The ESP warning lamp v, located in
the instrument cluster comes on.
Some functions of the ESP remain active,
even when the button is in the OFF posi-
tion.
The ESP warning lamp v in the instru-
ment cluster starts to flash at any speed as
soon as the tires lose traction.
!
Avoid spinning of one drive wheel for
an extended period with the ESP
switched off. This may cause serious
damage to the drive train which is not
covered by the Mercedes-Benz Limited
Warranty.
Warning!
v
When the ESP warning lamp
illuminated continuously, the ESP is
switched off.
Adapt your speed and driving to the prevail-
ing road conditions and to the non-operating
status of the ESP.
Switching on the ESP
Press button 1.
The ESP warning lamp v in the in-
strument cluster goes out. You are now
again in normal driving mode.
Safety and Security
Driving safety systems

The SBC brake system

The SBC brake system combines a hydrau-
lic brake circuit with electronically con-
trolled brake servo assistance. You have
increased braking safety and improved
braking comfort.
Warning!
G
Never ignore a brake malfunction indicated
is
in the speedometer display, for example by
;
the
(USA only) or
indicator lamp. Refer to the "Practical hints"
section ( page 291). Also read and ob-
serve the messages in the instrument clus-
ter display ( page 295).
G
3
(Canada only)
77

Advertisement

Table of Contents
loading

This manual is also suitable for:

2003 e 5002003 e-classE 320E 500E 500 2003E 320 2003 ... Show all

Table of Contents