Combination Switch; Hazard Warning Flasher - Mercedes-Benz 2003 CL 500 Operator's Manual

Combination switch

The combination switch is located on the
left side of the steering column.
1 High beam
2 High beam flasher
Switching on high beams
Turn exterior lamp switch to
position B ( page 108).
Push the combination switch in
direction 1.
The high beam symbol A is illumi-
nated on the instrument cluster.
High beam flasher
Pull the combination switch briefly in
direction 2.

Hazard warning flasher

The hazard warning flasher can be activat-
ed with the ignition switched on or off. It is
activated automatically when an airbag is
deployed.
The switch is located on the center con-
sole.
1 Hazard warning flasher switch
Controls in detail
Switching on the hazard warning
flasher
Press the hazard warning flasher
switch.
All turn signals will blink.
i
With the hazard warning flasher acti-
vated and the combination switch set
for either left or right turn, only the re-
spective left or right turn signal will op-
erate when the key in the starter switch
is in position 1 or 2.
Switching off the hazard warning
flasher
Press hazard warning flasher switch
again.
i
If the hazard warning flasher was acti-
vated automatically, press switch 1
twice.
Lighting
111