Seat Heating - Mercedes-Benz 2003 CL 500 Operator's Manual

Seat heating

Vehicles without seat ventilation*
The switch is located on the door.
1 Normal heating
2 Rapid heating
Make sure the ignition is switched on.
All the lamps in the instrument cluster
light up.
Switching on seat heating
Press switch 1.
A red indicator lamp above the switch
lights up.
Switching off seat heating
Press switch 1 again.
i
The seat heating will be automatically
switched off after approximately
30 minutes.
Rapid seat heating mode
Press switch 2.
Both red indicator lamps above the
switch light up.
i
The system switches over to normal
heating mode after approximately five
minutes. Only the right-hand indicator
lamp remains lit.
Controls in detail
Switching off rapid seat heating mode
Press switch 2 again.
!
If one or both of the lamps on the seat
heating switch are blinking, there is in-
sufficient voltage due to too many elec-
trical consumers being turned on. The
seat heating switches off automatical-
ly.
The seat heating will switch back on
again automatically as soon as suffi-
cient voltage is available.
Seats
103