Settings Menu - Mercedes-Benz 2003 CL 500 Operator's Manual

Press button è or ÿ repeatedly
until you see the malfunction message
memory in the display.
No malfunction messages
If no malfunctions have occurred, the mes-
sage in the display is:
NO MALFUNCTION
Malfunctions have occurred
If malfunctions have occurred, you will see
the number of malfunctions in the display:
1 Number of malfunctions
Press button k or j .
The stored messages will now be dis-
played in order. See the "Practical
hints" section for malfunction and
warning messages ( page 270).
Should any malfunctions occur while driv-
ing, the number of malfunctions will reap-
pear in the display when the key in the
starter switch is turned to position 0 or re-
moved from the starter switch.
i
The message memory will be cleared
when you turn the key in the starter
switch to position 1 or 2. You will then
only see high priority malfunctions
( page 270).
Controls in detail
Control system

Settings menu

In the menu there are two func-
SETTINGS
tions:
The function
TO RESET: R BUTTON FOR
, with which you can reset all the
3 SEC.
settings to the original factory settings.
A collection of submenus with which
you can make individual settings for
your vehicle.
Press button è or ÿ repeatedly
until the menu appears in the
SETTINGS
display.
131