Switching On Headlamps; Turn Signals And High Beam - Mercedes-Benz 2003 CL 500 Operator's Manual

Getting started
Driving
Warning!
On slippery road surfaces, never downshift
in order to obtain braking action. This could
result in drive wheel slip and reduced vehi-
cle control. Your vehicle's ABS will not pre-
vent this type of loss of control.

Switching on headlamps

Exterior lamp switch
1 Off
2 Low beam headlamps on
Turn the switch to B .
46
More information can be found in the
G
"Controls in detail" section ( page 108).

Turn signals and high beam

The combination switch is on the left of the
steering column.
Combination switch
1 Turn signals, right
2 Turn signals, left
Press the combination switch up 1 or
down 2.
i
To signal minor directional changes,
e.g. passing or changing lanes, move
combination switch to point of resis-
tance only and release. The turn signal
blinks three times.
High beam
Push the combination switch forward.
The high beam headlights are switched
on.
The high beam symbol A in the
tachometer lights up.
More information can be found in the
"Controls in detail" section ( page 111).