Console Port; Serial Connection Default Settings - Alcatel-Lucent OmniSwitch 6350 Hardware User's Manual

OmniSwitch 6350 Chassis and Hardware Components

Console Port

The console port, located on the chassis front panel, provides a console connection to the switch and is
required when logging into the switch for the first time. By default, this RJ-45 connector provides a DTE
console connection.

Serial Connection Default Settings

The factory default settings for the serial connection are as follows:
baud rate
parity
data bits (word size)
stop bits
flow control
OmniSwitch 6350 Hardware Users Guide
9600
none
8
1
none
September 2015
Console Port
page 3-17