Travis Industries 564 SS GS2 Installation Manual page 71

Optional Equipment
8. Disconnect the following:
9. Remove and place aside the base IFC (it may be kept for spare parts).
10. Remove and place aside the On/Off-Comfort Control-Battery Plate with harness (the batteries and
assembly may be kept for spare parts).
11. Remove and discard the screws (see "a" below) holding the stock regulator in place (see "b" below).
Remove and discard the stock regulator, spring, and gasket (see "c" below).
© Travis Industries
Power (3 wires)
On/Off wires
a
b
d
(for qualified installers only)
Pilot connections (slide silicone tubing up)
T-20 Torx or
Slotted Screwdriver
4141208
Main harness
c
71
100-01397