Add/Remove Channels From Scan Memory; Master Scan (Ms) Mode - Uniden UH8010S+ANT Owner's Manual

Operation

Add/Remove Channels from SCAN Memory

Select which Scanning Mode you wish to use; OS or GS.
Select the channel you want to store.
Press and hold to store. The icon appears and a short tone is
heard. To remove the channel from SCAN memory, press and hold
once more. The icon disappears.
MASTER SCAN Mode
MASTER SCAN is the default scan mode and is enabled to allow con-
tinual communication across congested channels.
Master Scan scans channels stored into GS Memory and only opens the
squelch for signals with the correct subcode (CTCSS or DCS tone).
To achieve this, all radios in your group must have the same channels
in GS memory (group channels) and use the same Subcode (CTCSS or
DCS tone).
By scanning only group channels, radios in the network will be able
to detect and receive group transmissions- continual communication
without interruption.
When transmitting in this mode, the radio switches to an unused group
channel if it detects another signal with no code, or the wrong code, on
the channel last used by the group.
In this way, all group users will be able to have continual communication
to or from other users.
19
UNIDEN UH8010S/UH8020S UHF CB Transceiver