Busy Channel Lockout; Selecting The Call Tone - Uniden UH8010S+ANT Owner's Manual

Operation

Busy Channel Lockout

If the channel is already in use, you can prevent the UHF CB Radio from
transmitting . This is particularly important when using CTCSS/DCS.
1. Press 5 times. The BCL setting flashes.
2. Turn the Channel Selector or press
between ON or OFF.
3. Press to store the setting.
4. Press and hold

Selecting the Call tone

1. Press 6 times. The call tone setting flashes.
2. Turn the Channel Selector or press
between 1, 2, 3, 4 and 5.
3. Press to store the setting.
4. Press and hold
UNIDEN UH8010S/UH8020S
to save & exit menu mode.
to exit from the menu mode.
25
/ to change the setting
/ to change the setting
UHF CB Transceiver