Defining Script Properties - Symbol PDT 7200 series Reference Manual

Defining Script Properties

Before a script is created, the script properties must be defined. This defines the type of
terminal, type of flash type, number of disks being created, the memory configuration of each
disk volume.
To define the script properties:
1. With TCM open, click on the Script Window to make it the active window.
2. Under the script menu, select the Properties option.
OR
Click on
3. Under the Terminal pull-down menu, select 7200CE .
4. In the Flash Type field, enter the type of flash chip installed in your unit, as indicated
by booting into IPL. Refer to
5. Under the Disks pull-down menu, select the number of disk volumes to be created.
from the tool bar. The Script Properties window displays.
Invoking IPL
Configuring the Terminal
on page 6-16.
6-7