Calibrating The Screen - Symbol PDT 7200 series Reference Manual

Calibrating the Screen

The first time you start your PDT 7200 (and whenever the terminal is cold-booted) the
calibration screen appears. This section describes how to calibrate your PDT 7200 so the
cursor on the touch screen aligns with the tip of your stylus.
To calibrate your PDT 7200:
1. Use your fingertip or a plastic stylus and tap the center of each target that appears
on the screen.
2. Tap the screen to continue booting Windows
3. The Symbol Shell and Launcher programs are deployed.
Tap the center of the target with the
stylus. Repeat as the target moves
around the screen.
Figure 1-1. Tapping Target
®
CE.
Getting Started
1-7