QSC DPA4.2 User Manual page 27

Step 1 — Overwrite Preset
U1: A B C D
Press ENTER to save preset
Utilities
HOME > UTILITIES > STATUS (ENTER)
The Utilities section provides the following amplifi er information and functionality:
Step 1 — Check the Amplifi er's Health
UTILITY - STATUS
Amp Total Run Time:
Hardware: V12
Firmware: V1.0.22
DC Status: OK
VRail 1: 148V
VRail 2: -150V
HOME > UTILITIES > AMP ID (ENTER)
Step 1 — Name the Amplifi er
UTILITY - AMP ID
Serial #: 123abc
Change Amp ID to:
m y
TD-000434-00-A
SAVE
22:37:48 Hrs
Temperature:
CH1 & CH3: 27C
CH2 & CH3: 29C
Power Supply: 24C
Amp ID: my amp ID
a m p I D
CONFIRM
Amp Total Run Time:
HH:MM:SS
Hardware version
Firmware version
update thru Amplifi er Navigator
DC Status:
VRail 1 = +147VDC +/- 5V typical
VRail 2 = -147VDC +/- 5V typical
To edit "Change Amp ID to:" press
Indicates editing
Scroll to desired letter position
Indicates "New
Turn to select desired character
Preset Name"
is selected.
Up to 21 characters
A - Z / a - z / 0 - 9 /
_ / - / space
27
To save, press
To exit without saving, press
To confi rm Save, press
Temperature (DPA 4.3 & 4.5)
Thermal Limiting starts at 69ºC
Thermal Shutdown at 80ºC
press
press
When you are fi nished, press
Scroll to CONFIRM press
`
ENTER
`
EXIT
`
ENTER
`
ENTER
`
ENTER
`
ENTER
`
ENTER
`
ENTER