QSC DPA4.2 User Manual page 20

HOME > OUTPUTS > MIXER (ENTER)
Step 2 — Test - Pink Noise and Tone Generator
F1: A B C D
Source
TEST
Tone
• You must be in the TEST mode to use Noise and Tone
• Noise and Tone cannot be used on the same channel at the same
time.
• Use the Source to switch between Noise and Tone.
• Noise and Tone do not go through the Mixer.
• Noise and Tone Gain controls are independent of the Input and
Output Gain controls.
TD-000434-00-A
MIXER
Output
PINK
A
20.0 Hz –20 kHz
Output Levels
Off (-80 dB) to -10 dB
Noise Tone Freq
OFF ON 1.0k
20
Scroll to TEST
On Source, press
Select Tone or Noise
Scroll to Noise
Adjust Noise to desired level
Scroll to Tone
Adjust Tone to desired level
Scroll to Freq
Adjust to desired frequency
When you are fi nished, press
press `
ENTER
`
ENTER
press `
ENTER
press `
ENTER
press `
ENTER
press `
ENTER
press `
ENTER
press `
ENTER
press `
ENTER
`
ENTER