6.3.2 Configuration
On the Fisheye Setting page, click the eZ Tracker icon
the eZ Tracker function, you have to connect the speed dome camera to the fisheye camera and then
configure the calibration setting. Click the Calibration Setting
display the setup instructions. Follow the on-screen instructions or the below setup steps to complete the
calibration setting.
1. To connect the speed dome camera to the fisheye camera, click the Calibration Setting
the Step 1 Instruction appears. Type the IP address and user ID / Password of the speed dome camera.
2. After clicking the Apply button, the Step 2 Instruction appears. And the speed dome window will be
highlighted with a yellow frame.
to enter the eZ Tracker setting page. To enable
button, the online setup wizard will
45
EFN Series Fisheye IP Camera
button,