Disconnect The Ktc From The Computer; Connect A Usb Flash Drive; Change The Decorative Faceplates; Bluetooth Connection - Pandigital PANTV1512 Kitchen Technology Center User Manual

Hide thumbs Also See for PANTV1512 Kitchen Technology Center:
Table of Contents

Advertisement

5. To copy files from the memory card into your PC, select and drag them to the desired location on your
computer.
6. To copy photos from your computer into the KTC's internal memory, select the files you wish to copy,
click
Edit > Copy.
TIP: Most cameras and graphic programs store photos in the Windows "My Pictures" folder. If you
didn't save them in a different location, they may be found in the "My Pictures" folder.
7. Position your cursor back to the disk drive in the open window for the internal memory, click anywhere
within the window and then click Edit> Paste.
8. Similarly, to copy photos from your computer to your memory card, copy and paste to the disk drive
corresponding to the memory card.
IMPORTANT: If your PC is connected to Local Area Network drives, or if you have multiple drive letters
already assigned to peripheral devices, you will need to manage your drive settings in
Windows to free up the four drive letters immediately following your CD-ROM drive so the
KTC can assign them to memory card slots properly.

Disconnect the KTC from the Computer

IMPORTANT: Do not just unplug or switch off the KTC when files are being transferred between the PC and
KTC, as that can seriously damage the memory.
1. In Windows XP, left-click on the
2. Click OK to disconnect. A final dialog box opens.
3. Click Close. When the message "It is now Safe to Disconnect Hardware" appears, you can disconnect
the USB cable from your computer.

Connect a USB Flash Drive

Your KTC will recognize a USB Flash Drive the same way it recognizes external memory cards. When you insert
the flash drive, the KTC automatically recognizes photo, music, and video files contained on it.

Change the Decorative Faceplates

Depending on the model, your KTC may come with interchangeable faceplates for decorative purposes.
1. To change the faceplate, remove the faceplate of the KTC by pulling it off from one of the corners.
2. Replace with a new face plate.
Bluetooth
Connection
Bluetooth USB Dongle is required (sold separately).
phones; e.g.: BlackBerry, Motorola, Nokia, SonyEricssson and others.
Note: Models may vary; check to be sure your phone supports transmitting photos to devices like KTC.
icon and select the storage device corresponding with the KTC.
USB Bluetooth Dongle Support connectivity to popular mobile
56

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents