Table of Contents
Advertisement
Disconnect the Digital Photo Frame from the Computer
It is important not to just unplug or switching off the Digital Photo Frame
when files are being transferred from the memory card or computer to the
built-in memory. It can seriously damage the memory.
1. In Windows, look for the USB icon and select Safely Remove Hardware.
A dialog box opens.
2. Select USB Mass Storage Device and click Stop. Another Dialog box
opens.
3. Click OK. A final dialog box opens.
4. Select Close. When the message "It is Now Safe to Disconnect Hardware"
appears, you can disconnect the USB cable from your computer.
Connect to a Macintosh
You can also copy files from your Macintosh Computer to your Digital Photo·
Frame.
1. Use the included USB cable to connect your Digital Photo Frame to your
Macintosh.
2. Macintosh will recognize the Digital Photo Frame as an external storage
device.
3. Drag and drop files between the two devices as you normally move
photo files.
4. To safely disconnect the Digital Photo Frame from your Macintosh,
select Digital Photo Frame's icon on your desktop and press Command-
e to eject the disk. When the icon is no longer on the desktop, it is safe
to unplug the USB cable.
Connect a USB Flash Drive
Your Digital Photo Frame will see a USB Flash Drive the same way it sees
memory cards.
19
Advertisement
Table of Contents
