Table of Contents Table of Contents Welcome Message Important Safety Precautions Cleaning the Kitchen Technology Center Safety Instructions Important Information Television Antenna Connection Protection Introduction What's In the Box Installation Attaching the TV Stand Preparation For Under Cabinet Mounting Setting Up the Kitchen Technology Center Power Button Side Control Buttons Input Connectors...
Page 3
Setting Viewing Options Displaying a Clock with a Calendar and a Slideshow Internet Photo Connecting to Your PC via WiFi Pandigital DPF Manager Copying Files from a Computer or Flash Drive PanTouch Digital Picture Frame Setup Menu Changing the Decorative Faceplates...
Welcome Message Cleaning the bezel and remote control Congratulations on your new Kitchen Technology Center (KTC) High Definition LCD Television purchase. Use a 100% cotton cloth or micro-fiber cloth for cleaning. Thank you for your support. To ensure safety and many years of trouble free operation of your TV, please If the remote control or bezel is dirty to the point where you cannot simply dry wipe it, please lightly read the manual carefully before making any adjustments, and keep them in a safe place for future dampen the wiping material with clean water and wipe again.
Any power source other than the specified one Electrical Code, ANSI/NFPSA 70, provides information with regard to proper grounding of the mast and supporting to the KTC (PANTV1512) LCD TV. may cause fire or electric shock. structure, grounding of the lead-in wire to an antenna discharge unit, size of the grounding conductors, location of Unplug the power cord before cleaning the KTC LCD TV.
Attaching the TV Stand Introduction Welcome to the Pandigital Internet Multimedia Kitchen Technology Center! Now you can access your Please place the stand on a flat surface (i.e. Table). favorite Recipes, Cookbooks and other RSS information from Internet, watch your favorite TV shows, or display your digital photos directly from your memory card, no computer is necessary.
Preparation For Under Cabinet Mounting Setting Up the Kitchen Technology Center The Kitchen Technology Center is easy to set up. Just follow these steps: Place the KTC on a flat surface with cloth so the bezel does not get scratched. Unscrew the 3 screws that lock the stand to the monitor.
CH(+)/ CH(-)/ VOL(-)/ VOL(+) Selects and Input Connectors moves the item on screen. CH(+) / CH(-) also functions as channel up and down. VOL(-)/ VOL(+) also functions as volume up and down. On KTC source CH(+) / CH(-) also functions as photo Select and Unselect.
Please Note: Make sure the power of KTC LCD HDTV is turned off. Only use AAA batteries. Connect the Coaxial RF cable from your antenna or digital cable to the TV port on the back of your KTC Do not mix new and old batteries. This may result in cracking or leakage that may pose a fire risk or LCD HDTV.
Connecting DVD player with S-Video Connecting Cable or Satellite boxes with HDMI Make sure the power of KTC LCD HDTV and your set-top box is turned off. Make sure the power of KTC LCD HDTV and your DVD player is turned off. Connect a HDMI cable to the HDMI output of your set-top box and the other end to the HDMI port on the Obtain an S-Video cable.
Use the button to select AUTO SCAN and press ENTER . If you have Cable selected make sure Ready to Watch Some TV? Cable System has the setting at AUTO. Use the button to select START TO SCAN and press ENTER.
Via TV Side Panel Buttons In order to provide more than one type of OSD control buttons, the side panel's buttons have also been made functional for adjusting the OSD. Press MENU to open the OSD. SOURCE - This button displays all the different sources of the TV. The sequence is shown as follows: Press to move to VIDEO and press the ENTER button on the remote.
Press to move to SETUP and press ENTER . SOUND MODE This function allows you to adjust audio preset modes custom standard, to select the option you want to adjust and use to adjust them. speech, movie, and music. MENU LANGUAGE - This function allows you to adjust the language of the OSD menu. BASS This function adjusts the level of low pitch sound in a TV.
Press to move to PARENTAL and press ENTER. Detailed Explanations to select the option you want to adjust and use to adjust them. CHANGE PASSWORD This function changes the password of the parental options. SYSTEM LOCK This function enables the TV blocking options. UNRATED LOCK This function locks or unlocks TV shows or Movies that are unrated.
MPAA Rating G (MPAA) General audiences. All ages admitted. PG (MPAA) Parental guidance suggested. Some material may not be suitable for children. PG-13 (MPAA) Parents strongly cautioned. Some material may be inappropriate for children under 13. R (MPAA) Restricted. Under 17 requires accompanying parent or adult guardian (age varies in some jurisdictions). Rating Explained NC-17 (MPAA) No one 17 and under admitted.
Use the buttons to select the channel you want to jump to and press ENTER to confirm. Using the KTC PanTouch and Remote Control You can also use the keypad numbers 1 and 2 as page up and page down if you have too many channel numbers in the list.
Press the Left and Right arrows on the Remote Control or the Kitchen Technology Center to select Photo, Recipe, Music, Video, File, Clock, or Network Photo; press ENTER to make a selection. PHOTO function - brings you to the thumbnail screen listing all your photos on the selected memory device.
Page 18
The Cookbook and Favorite Recipes Thumbnails Screen Copying Recipes to a Favorites Category From the Home screen, choose the RECIPIE function and press ENTER. To return to the HOME screen touch the HOME icon on the KTC. On the remote control press EXIT button. Use the Left (BACK) and Right (FWD) buttons on the Remote Control until the desired cookbook is highlighted.
To delete a recipe card(s) from a favorite's category. Display Photos and Slideshows Using the Remote - Press the SETUP button, select the Delete Photo menu item and press the ENTER button. The Photo Thumbnails Screen Using the Touch Interface - Activate the touch interface by touching the top right corner of the frame. Then touch the DELETE SEL icon, and then touch the YES icon to confirm the deletion.
Continue selecting or de-selecting photos in the same manner. When all desired photos are selected, press SETUP on the Remote Control to open a Setup Menu. Select Start Slideshow and choose Slideshow Selected in the submenu to start the custom slideshow. Use PanTouch to create a custom slideshow: With the Thumbnails Screen displayed, use the arrow buttons to highlight a photo.
Press ENTER to confirm your selection. Press the SETUP button and go down to Select Media Source from System Setup Menu. Choose the desired Media available in highlights. Please Note: Go back to Home screen to select Video. Use the Arrow keys to choose Video and press SELECT. A screen listing all of the video files opens. Un-assigning a picture from a folder will not delete the picture from Internal memory.
Bluetooth Dongle into the KTC. Delete a Single Photo on the Thumbnails Screen a. Insert BT dongle to the USB host port and then turn on the KTC. Please check Pandigital's website Using the Remote Control - for the comparable USB Bluetooth adapters. http://www.pandigital.net With the Thumbnails screen displayed, use Arrow buttons to select a photo to a delete.
Insert your compatible wireless USB adaptor (PANWF01) to the USB host port and then turn on the shows the current setting. KTC. Please check our website for the comparable USB wireless adapters. http://www.pandigital.net Use the Up and Down arrows to choose the desired setting.
The Pandigital DPF Manager allows you to communicate wirelessly with multiple Pandigital DPFs to transfer photos between the PC and multiple DPFs. Setting up the Pandigital DPF Manager to transfer photos from your PC to the KTC requires 3 steps. Copying Files from a Computer or Flash Drive Setting up your Wireless Network User ID and Password on the KTC Downloading and installing the Yahoo Widget Engine on your PC.
Disconnect the Kitchen Technology Center from the Computer Specification It is important not to just unplug or switch off the Kitchen Technology Center when files are being transferred from the memory card or computer to the built-in memory. It can seriously damage the memory. Display panel In Windows XP, left-click on the icon and select the correct storage device.
Sound: Mono / Stereo / SAP Favorite Channel ATSC V-chip Problems Solutions Video input format: 1080i, 720p, 480p, 480i UNIVERSAL REMOTE This TV follows SONY s universal remote code. Please check your Analog closed caption: CODE hand book for SONY s codes then apply them. (CC1-CC4, Text 1-Text 4) THE TV TURNS ON ATSC (continued)
Consult the dealer or an experienced radio/TV technician for help. Pandigital will repair or replace the product, at its option, at no charge. After this ninety (90) day period, labor charges will be charged on a case by case basis.