Watch A Video; Video Playback Mode; Set Video Playback Mode; File - Pandigital PANTV1512 Kitchen Technology Center User Manual

Watch a Video

1. Insert a memory source containing video files into the KTC.
2. With the HOME screen displayed, use the arrows to highlight VIDEO, and then touch or press ENTER. A
list of all video files found on the memory source is displayed.
3. Use the arrows to highlight the video you want to view, and then touch PLAY or press ENTER.
4. The video will begin to play.
5. Touch BACK or press EXIT to stop viewing the video and return to the file list. To play another video,
repeat
step 3.
Adjust the Volume
Use "CH+" and "CH-" on the remote control to adjust the volume.

Video Playback Mode

There are three video playback modes that you can set in the KTC.
No Repeat – play a selected video file only once.
•
Repeat Single – play a selected video file continuously until you stop it.
•
Repeat All – play all video files on the memory source continuously until you stop them.
•

Set Video Playback Mode

Note: You must use the KTC remote control for this feature.
1. With the HOME screen displayed, use the arrows to highlight VIDEO, and then press ENTER. A list of all
video files found on the memory source is displayed.
2. Press SETUP.
3. Use the arrows to highlight Video Playback Repeat and then press ENTER.
4. Use the arrows to highlight your desired mode and then press ENTER.
5. Press EXIT to return to the music file list.
6. To view a video now, use the arrows to highlight the video file and then press ENTER.

FILE

This feature offers another method for viewing or listening to available files on your selected memory cards,
whether it's audio, photo, or video files.

View Contents of Selected Memory Source

1. With the HOME screen displayed, use the arrows to highlight FILE, and then touch or press ENTER. The
contents of the selected memory source will be displayed.
2. Touch VIEW/PLAY or press ENTER on an individual file name to activate the file, i.e., view photo/video,
or play music.
Note: If your memory source contains folders, touch VIEW/PLAY or press ENTER to view contents of folder,
select the desired file, and then touch VIEW/PLAY or press ENTER to activate the file.
49