Table of Contents
Advertisement
Customizing the Slideshow
The Digital Photo Frame can include all of the photos on the selected
memory source in the slideshow, or you can select specific photos and for
the slideshow. You can also add music to your slideshow.
Set Up the Slideshow for All Photos
With the Thumbnails Screen displayed, press the SLiDESHOW button on
the Remote Control or the ENTER button twice on the frame, the slideshow
of all photos in the selected memory will begin.
Set Up a Slideshow of Selected Photos Only
Note:
This needs your remote control to create a custom slideshow.
1. With the Thumbnails Screen displayed, use arrow buttons to highlight
a photo; press + to select the photo or - to deselect it. A check mark is
displayed at the upper-right corner of the selected thumbnail photo.
2. Continue selecting photos in the same manner.
3. When all desired photos are selected, press SETUP on the Remote
Control or on the frame to open a setup menu.
4. Choose Start Slideshow and press ENTER.
5. Choose Selected from the menu to start your custom slideshow.
Play Music with the Slideshow
To play background music with a slideshow, copy MP3 files onto the same
memory card as your photos. The music will playas the slideshow runs.
See (Copying Files from a Computer) for details on copying files. You can
also choose a music file to play without a Slideshow. Just select it from the
Music screen.
Note:
Music files must be standard MP3 format and not from licensed
music download services.
Watch a Video
You can watch video files on your Digital Photo Frame as well. It supports
the Motion JPEG (AVI) video format used by most digital cameras.
1. Insert a memory card with video files on it. The Card Selection Screen
opens. Choose the desired card.
2.
Press ENTER. The Mode Selection screen opens.
3.
Use the Arrow key to select the Video mode then press ENTER. A screen
listing all the video files opens.
4. Select the desired file and press ENTER. The Digital Photo Frame plays
the video.
9
Advertisement
Table of Contents
