Operating Your Hunter Fan - Hunter Ceiling Fans Installation And Operation Manual

OperatIng yOur Hunter Fan

Control switches are identified by
the following symbols:
Light
Fan
Figure 8a - Control Symbols
1. Turn on electrical power to the
fan.
2. The pull chain controls power
to the fan. The chain has four
settings in sequence: High, Me-
dium, Low and Off.
• Pull the chain slowly to change
settings.
• Release slowly to prevent the
chain from recoiling into the
blades.
44204-01 5/30/2007
Reversing
Figure 8b - Air Flow Patterns
To change the direction of air
flow, turn the fan off and let it
come to a complete stop. Slide
the reversing switch on the fan to
the opposite position as shown in
Figure 8c. Restart fan.
4. If your fan wobbles when operat-
ing, use the enclosed balancing
kit and instructions to balance the
fan.
Figure 8c - Pull Chain and Reversing
Switch