OPERATING YOUR HUNTER FAN
Control switches are identified by the
following symbols as shown in Figure
8a.
Fan
Light
Reversing
Figure 8a - Control Switch Symbols
1. Turn electrical service "on" at main
panel.
2. The Fan Pull Cord controls power
to the fan. It has four settings in
sequence: High, Medium, Low
and Off.
• Pull the cord slowly to change
settings.
• Release slowly to prevent the
cord from recoiling into the
41419-01
10/29/2002
blades, possibly resulting in
damage to blades or pull cord.
3. Ceiling fans work best by blow-
ing air downward (counter-
clockwise blade rotation) in
warm weather to cool the
room with a direct breeze. In
winter, having the fan draw air
upward (clockwise blade rota-
tion) will distribute the warmer
air trapped at the ceiling around
the room without causing a
draft. Refer to Figure 8b.
Figure 8b - Air Flow Patterns
To change the direction of air flow,
turn the fan off and let it come to
a complete stop. Push the revers-
ing switch on the fan as shown in
Figure 8c. Restart fan.
Fan
Pull
Cord
Reversing
Switch
Light Pull
Cord
Figure 8c - Fan Cord, Light Cord and
Reversing Switch
4. If your fan wobbles when operat-
ing, use the enclosed balancing kit
and the accompanying instructions
to balance the fan.
®
21