Step 5 - Installing The Canopy - Hunter Ceiling Fans Installation And Operation Manual

step 5 - InstallIng tHe CanOpy

1. Slide the canopy to where the
top is within 2 mm of the ceiling.
The canopy should not touch the
ceiling or it will cause noise and
possible wobble.
2. Insert and tighten the #6-32
canopy screw to hold the canopy
in place. Refer to Figure 5.
Note: Screws and screw holes
are provided and may be used
to better level the canopy.
44204-01 5/30/2007
Canopy Screw
Figure 5 - Assembling the Canopy
Canopy