Rebooting The Receiver; Resetting The Receiver To Default - ActionTec SBWD100B User Manual

5.3.22. Rebooting the Receiver

Follow the procedure below to reboot the receiver:
1. Go to the Maintenance tab page by clicking the Maintenance tab.
2. Click the Yes button next to "Reboot Receiver".
3. Click OK on the pop-up message box to confirm.

5.3.23. Resetting the Receiver to Default

Follow the procedure below to reset the receiver:
1. Go to the Maintenance tab page by clicking the Maintenance tab.
2. Click the Yes button next to "Reset Settings to Factory".