Troubleshooting Guide - Blodgett 1060 Installation Operation & Maintenance

Maintenance

Troubleshooting Guide

POSSIBLE CAUSE(S)
SYMPTOM: Strong bottoms on the bakes
• Too much bottom heat
• High gas pressure
• Faulty flue (strong direct vent)
• Product left in the oven too long
SYMPTOM: Uneven bakes
• Poor ventilation
• Oven doors left open too long
• Improper scaling of dough
• Fluctuating gas pressure
• Warped pans
SYMPTOM: Product burning
• Thermostat set too high
• Product left in the oven too long
• By-pass flame too high
• High gas pressure
• Thermostat out of calibration
• Heat deflectors worn out
*Denotes remedy is a difficult operation and should be performed by qualified personnel only. It is recommended, how-
ever, that All repairs and/or adjustments be done by your local Blodgett service agency and not by the owner/operator.
Blodgett cannot assume responsibility for damage as a result of servicing done by unqualified personnel.
WARNING!!
Always disconnect the power supply before cleaning or servicing the oven.
SUGGESTED REMEDY
• Reduce cook temperature and increase time
• *
• *
• Shorten cook time
• *
• Do not open door unnecessarily
• Scale dough consistently
• *
• Change pans
• Reduce cook temperature
• Shorten cook time
• *
• *
• *
• *
18